S5700 Series L2 Managed Ethernet Switch
video

S5700 Series L2 Managed Ethernet Switch

The S5700 series switch is a layer 2 Ethernet switch, which can meet the needs of cost-effective Gigabit access and Gigabit uplink for enterprise networks and operator customers. S5700 uses a high-performance low-power network processor, provides Gigabit line-speed forwarding performance, supports green Ethernet line sleep capability, has the lowest power consumption of the same-level equipment in the industry, supports powerful QoS and ACL functions, and supports IP+MAC+ Security features such as port binding support service flow classification and packet priority marking. Support static data packet sampling, SFLOW function, support multi-port mirroring analysis function, support static and flexible QinQ function, support Ethernet OAM 802.3ag (CFM), 802.3ah (EFM).
Send Inquiry
Product Introduction

Product Overview

The S5700 series switch is a layer 2 Ethernet switch, which can meet the needs of cost-effective Gigabit access and Gigabit uplink for enterprise networks and operator customers. S5700 uses a high-performance low-power network processor, provides Gigabit line-speed forwarding performance, supports green Ethernet line sleep capability, has the lowest power consumption of the same-level equipment in the industry, supports powerful QoS and ACL functions, and supports IP+MAC+ Security features such as port binding support service flow classification and packet priority marking. Support static data packet sampling, SFLOW function, support multi-port mirroring analysis function, support static and flexible QinQ function, support Ethernet OAM 802.3ag (CFM), 802.3ah (EFM).

Product Interface

product-1281-607

product-1254-600

Key Features

Carrier-level equipment stability

Based on Linux operating system,support IPv4/IPv6 dual protocol stack platform

Support multiple link redundancy and network redundancy protocols such as STP/RSTP/MSTP/ERPS/LACP

Perfect safety mechanism

Support link protection functions such as BFD, FlexLink, LACP and ERRP

Support remote loop detection function

Support CFM,EFM

Support remote user authentication based on Tacacs+, Radius, and Local user authentication

Powerful QoS capabilities

Support port speed and flow speed limit function

Support classification based on service flow and Qos flow control function

Support queue scheduling algorithms such as SP/WRR/SP+WRR

Support port-based and service flow-based mirroring functions

 

Enhanced multi-service capabilities

Support L2-Tunnel

Support Ethernet OAM protocol such as CFM,EFM

Rich routing protocol

Support easy-to-use network management function

Support CLI based on RS232 serial port, Telnet and SSHv2

Support WEB-based configure operation management, support SNMP V1/V2/V3

Support remote upgrade or equipment through FTP and TFTP

Powerful QoS capabilities

Support port speed and flow speed limit function

Support classification based on service flow and Qos flow control function

Support queue scheduling algorithms such as SP/WRR/SP+WRR

Support port-based and service flow-based mirroring functions

Enhanced multi-service capabilities

Support L2-Tunnel

Support Ethernet OAM protocol such as CFM,EFM

Rich routing protocol

Support easy-to-use network management function

Support CLI based on RS232 serial port, Telnet and SSHv2

Support WEB-based configure operation management, support SNMP V1/V2/V3

Support remote upgrade or equipment through FTP and TFTP

Hardware Specifications

 

 

 

 

S5700-24TP4TS

Port

8*10/100/1000M Base-T,2*1000M Base-X SFP

8*10/100/1000M POE Base-T,2*1000M Base-X SFP

24*10/100/1000M Base-T,4*1000M Base-X SFP

24*10/100/1000M POE Base-T,

4*1000M COMBO,

Chip Solution

RTL8380M

RTL8380M

RTL8382M

RTL8218D

RTL8382M

RTL8218D

Exchange Capacity

20Gbps

20Gbps

56Gbps

56Gbps

Packet Forwarding Rate

14.88Mpps

14.88Mpps

41.66Mpps

41.66Mpps

MAC Address

8K

/

/

Packet Buffer

4.1Mbit

/

/

Memory & Storage

Memory:256MB; Storage:32MB

Power

AC: 100~240V 47/63Hz;

Power Consumption

Idle≤10W

Full load≤18W

Idle≤10W

Full load≤18W POE Budget 135W

≤24W

≤450W

Weight

0.7kg

1.2kg

2.2kg

3.2kg

Dimensions

(Width * Height * Depth)

200X149X44 mm

200X149X44 mm

440X209X44 mm

440×209×44 mm

Environment Temperature

Working Temperature:-10℃~50℃

Storage temperature:-40℃~70℃

Relative Humidity: 5%~95%, non-condensing

 

 

Software Specifications

 

S5700 Series

Stacking Management Function

Supports unified IP management and configuration view

VLAN

Support 4K VLAN

Support VLAN based on port, MAC and protocol

Support dual Tag VLAN, port-based Static QinQ and Fiexible QinQ

Access/Trunk/Hybrid

VLAN Swap

Ethernet

Ethernet interface operating modes

Ethernet interface operating rates

Jumbo Frame

Port enable/disable

Flow-control tx/rx

Port based storm-control

Unknow-unicast/unknow-multicast/broadcast storm-control

Port-isolate

MAC

Support static MAC address setting

Support black hole MAC address filtering

Support port MAC address limit

Automatic learning and aging of MAC addresses

ARP

Static and dynamic ARP entries

Aging of ARP entries

Gratuitous ARP

ARP-Proxy

Port Control

Support two-way bandwidth control

Support port storm suppression

Support 9K Jumbo ultra-long frame forwarding

Port Aggregation

Support static link aggregation

Support dynamic LACP

Each aggregation group supports a maximum of 8 ports

LAG load balance(SIP/DIP/SMAC/DMAC)

Mirroring

Supports multi-port mirroring analysis

Service flow-based image analysis

ACL

Support standard and extended ACL

Support ACL policy based on time period

Provide MAC, IP, L4 port and port level security control functions

QoS

Traffic classification based on COS/DSCP (simple classification)

Traffic classification based on ACL (complex classification)

Traffic classification based on inner header of the tunnel packets

Queue scheduling

Remark the priority fields (COS/DSCP) of the packet based on ACL

Flow redirection

Flow mirror

Traffic policing based on direction(in/out) of Port

Traffic policing based on direction(in/out) of VLAN

Traffic policing based on direction(in/out) of flow

Traffic policing based on direction(in/out) of aggregated flow

Queue based traffic shaping

Port based traffic shaping

SP(Strict Priority)scheduling

WRR(Weighted Round Robin)scheduling

SP + WRR mixed scheduling

IPv4-v6 QoS(QCEs)

Safety

Support user hierarchical management and password protection

Support IEEE 802.1X authentication

Support Radius & TACACS+ authentication

Support MAC address learning limit, support black hole MAC function

Support port isolation

Support broadcast message rate suppression

Support IP Source Guard Support ARP flood suppression and ARP spoofing protection

Layer 3

Support ARP learning and aging

Support IPv4/IPv6 static route

Support dynamic route RIP/OSPF/BGP/ISIS

Support IPv4/IPv6 dual-stack platform

Support VRRP,CLI,Telnet,WEB,SNMP V1/V2/V3,SSHv2 mode

Terminal Services

Configurations through CLI

Console Terminal service

Maintenance

Per-module Debug features

ICMP Debug

CPU usage display and alarm

Memory usage display and alarm

Device temperature,PSU,FAN,status display and alarm

User operation logs

Management of logs, alarms, and debugging information

VCT(Virtual Cable Test)

Detailed Diagnostic-information collection

Manual /Schedule reboot

Reboot Information logging

Ping

IPv6 Ping

Traceroute

Port/Flow/Remote mirror

Multi-destination mirror(m:n)

To CPU/From CPU packets statistics

Time configuration

Timezone

System Security

SSHv1/v2

RADIUS

TACACS+

Authentication

Accounting

Port based dot1x

MAC based dot1x

MAC/IP ACL

Basic Mode ACL

Port/VLAN/L4-Port ACL

Time Range

IP Source Guard

Limitation on MAC address learning on interface

Rate limit

CPU Traffic Limit

CLI/WEB/SNMP/Telnet/SSH filtering

Spanning-Tree

Rapid Spanning-Tree Protocol

Multi-instance Spanning-Tree Protocol

Network

Management

DHCP Server

DHCP Relay

DHCP Snooping

DHCP Option60

DHCP Option82

SNTP(Simple Network Time Protocol)

LLDP

Configuration Management

Inband management interface and configuration

Out-band management interface and configuration

Privileged user priority and privileged commands

Network management based on SNMPv1/v2c/v3

Public and private MIB

Public and private Trap

Configuration and management based on WEB

Restore factory default configuration

File system

Upload and download files through FTP or TFTP

Upload and download files through Xmodem

System Management

Support FTP, TFTP file upload and download

Support SNTP

Support system work log

Support LLDP neighbor device discovery protocol

Support 802.3ah Ethernet OAM

Support RFC1213 SNMP network management

Support Ping and Traceroute

Supports configuration management based on WEB pages

Support the whole machine power failure alarm function

Upgrade

Upgrade with the local image file

Upgrade with the remote TFTP server

Online upgrade Uboot

 

 

Purchase Info

Product Name

Product Description

S5700-8T2S

8*10/100/1000M Base-T,2*1000M Base-X SFP

S5700-8TP2S

8*10/100/1000M POE Base-T,2*1000M Base-X SFP

S5700-24T4S

24*10/100/1000M Base-T,4*1000M Base-X SFP

S5700-24TP4TS

24*10/100/1000M POE Base-T,4*1000M COMBO

Hot Tags: s5700 series l2 managed ethernet switch, China s5700 series l2 managed ethernet switch manufacturers, factory, switch l3, Fiber Optic Switch 48 Port, 10Gigabit 40G 100G Uplink Layer 3 Switch, 100g switch, 1g switch, switch 2 5 g

Send Inquiry

whatsapp

teams

E-mail

Inquiry