Gigabit Access 10Gigabit Uplink Weak Layer 3 Switch
The H-S5710-28TX switch is a carrier-grade metro weak Layer 3 Ethernet switch. It is oriented to enterprise networks and operator customers of various scales and can meet the needs of cost-effective Gigabit access and 10Gigabit uplink. FC-S5710-28TX adopts high-performance low-power network processor, provides gigabit wire-speed forwarding performance, supports green Ethernet line sleep capability, has the lowest power consumption of similar equipment in the industry, supports powerful QoS and ACL functions, Support IP+MAC+port binding and other security features, support service flow classification and packet priority marking. Support static packet sampling, SFLOW function, support multi-port mirroring analysis function, support static and flexible QinQ function, support Ethernet OAM 802.3ag (CFM), 802.3ah (EFM), support policy-based IPV4/6 unicast routing, support Flexible forwarding strategy.
|
Model |
H-S5710-28TX |
|
Product configuration |
24*10/100/1000MBase-T，4*1000M SFP/10GE SFP+， |
|
Physical Interface |
10Gigabit Optical Ports: 4*10Gigabit optical ports, 10 Gigabit optical ports can be adaptively connected to Gigabit optical ports, type SFP/SFP+/LC; |
|
Gigabit Electrical Ports: 24 gigabit electrical ports, the gigabit electrical ports can be adapted to 10/100/1000M, type RJ45; |
|
|
Console Port: management serial port, used for command line management, type RS232; |
|
|
Mechanical structure |
Chassis shell: metal shell, air-cooled heat dissipation; |
|
Chassis size: Dimensions (length*width*height) (mm) 440*210*44; |
|
|
Installation method: standard 19-inch 1U rack-mounted installation; |
|
|
Features |
Support IPv4/IPv6 dual protocol stack platform, support RIP/OSPF/RIPng/OSPFv3/PIM and other routing protocols; |
|
Support multiple link redundancy and network redundancy protocols such as VRRP/ERPS/MSTP/FlexLink/MonitorLink; |
|
|
Support ACL security filtering mechanism, provide security control functions based on MAC, IP, L4 port and port level; |
|
|
Support Ethernet OAM 802.3ag (CFM), 802.3ah (EFM) and other Ethernet link detection mechanisms; |
|
|
Support remote user authentication based on Tacacs+/Radius, support Local local user authentication; |
|
|
Support SP/WRR/SP+WRR priority algorithm to ensure the transmission of various priority service flows on demand; |
|
|
Support IPv4/IPv6 static routing function; |
|
|
Support multi-port mirroring analysis function, support mirroring analysis based on service flow; |
|
|
Support static and flexible QinQ function; |
|
|
Support policy-based IPv4/6 unicast routing, and support flexible forwarding policies; |
|
|
Support CLI command line management based on serial port, Telnet, SSHv2; |
|
|
Support RFC1213 SNMP network management; |
|
|
Support configuration management based on WEB page; |
|
|
working environment |
Running temperature: -15°C～55°C; |
|
Storage temperature: -40°C～70°C; |
|
|
Relative humidity: 10%～90%, no condensation; |
|
|
Power consumption |
Power supply specifications: Single AC power supply; |
|
Input power: AC: input 90～264V, 47～67Hz; |
|
|
Power consumption of the whole machine: full load power consumption ≤ 22W, idle power consumption ≤ 13W; |
Finding an efficient and practical network switch is a necessary process in the modern network deployment process. In network switches, there are two products worthy of our attention, they are switch 24 port and switch 48 port.
These switches are designed for fast data transfer, they have multiple ports, they are very fast, and they are very easy to maintain. They are quite useful, not just for network administrators, but also for business and individual users.
First, for those small network deployments, a 24-port switch is sufficient. A 24-port switch is best for small businesses and personal use because it can provide a stable and fast network connection to all users (up to 24).
At the same time, if it is a large-scale network deployment, we will need a 48-port switch. The switch can support more than 24 users and still be very fast. Whether it is data transmission speed or network connection quality, it is much stronger than a 24-port switch.
Hot Tags: gigabit access 10gigabit uplink weak layer 3 switch, China gigabit access 10gigabit uplink weak layer 3 switch manufacturers, factory, 2 5 g switch, 10Gigabit 40G 100G Uplink Layer 3 Switch, switch layer 2 3, switch 10ge, net switch, switch 100g
You Might Also Like
Send Inquiry