■1GE+WIFI is designed as HGU (Home Gateway Unit) in deferent FTTH solutions; the carrier-class FTTH application provides data service access.
■1GE+WIFI is based on mature and stable, cost-effective XPON technology. It can switch automatically with EPON and GPON mode when it access to the EPON OLT or GPON OLT.
■1GE+WIFI adopts high reliability, easy management, configuration flexibility and good quality of service (QoS) guarantees to meet the technical performance of the module of China Telecom EPON CTC3.0.
■1GE+WIFI is compliant with IEEE802.11n STD, adopts with 2x2 MIMO, the highest rate up to 300Mbps.
■XPON 1GE+WIFI are fully compliant with technical regulations such as ITU-T G.984.x and IEEE802.3ah.
|
Technical Item |
Details |
|
Model |
H102 |
|
Feature |
Supports Dual Mode (can access GPON/EPON OLT). |
|
Supports GPON G.984/G.988 standards |
|
|
Support 802.11n WIFI (2x2 MIMO) function |
|
|
Support NAT, Firewall function. |
|
|
Support Flow & Storm Control , Loop Detection, Port Forwarding and Loop-Detect |
|
|
Support port mode of VLAN configuration |
|
|
Support LAN IP and DHCP Server configuration |
|
|
Support TR069 Remote Configuration and WEB Management |
|
|
Support Route PPPoE/IPoE/DHCP/Static IP and Bridge mixed mode |
|
|
Support IPv4/IPv6 dual stack |
|
|
Support IGMP transparent/snooping/proxy |
|
|
In compliant with IEEE802.3ah standard |
|
|
Compatible with popular OLT (HW, ZTE, FiberHome...) |
|
|
PON interface |
1 G/EPON port(EPON PX20+ and GPON Class B+) Upstream: 1310nm; Downstream: 1490nm SC/UPC connector Receiving sensitivity: ≤-27dBm Transmitting optical power: 0~+4dBm Transmission distance: 20KM |
|
LAN interface |
1x10/100/1000Mbps auto adaptive Ethernet interfaces. Full/Half, RJ45 connector |
|
WIFI Interface |
Compliant with IEEE802.11b/g/n Operating frequency: 2.400-2.4835GHz support MIMO, rate up to 300Mbps 2T2R,2 external antenna 5dBi Support: Multiple SSID Channel:13 Modulation type: DSSS、CCK and OFDM Encoding scheme: BPSK、QPSK、16QAM and 64QAM |
|
LED |
7 LED, For Status of POWER, LOS, PON, LAN1~LAN2, WIFI, WPS |
|
Push-Button |
4, for Function of Power on/off, Reset, WPS, WIFI |
|
Operating condition |
Temperature : 0℃～+50℃ Humidity :10%～90%（non-condensing） |
|
Power supply |
DC 12V/1A |
|
Net Weight |
<0.4kg |
|
Power Consumption |
<6W |
|
Pilot Lamp |
Status |
Description |
|
WIFI |
On |
The WIFI interface is up. |
|
Blink |
The WIFI interface is sending or/and receiving data (ACT). |
|
|
Off |
The WIFI interface is down. |
|
|
WPS |
Blink |
The WIFI interface is securely establishing a connection. |
|
Off |
The WIFI interface does not establish a secure connection. |
|
|
PWR |
On |
The device is powered up. |
|
Off |
The device is powered down. |
|
|
LOS |
Blink |
The device doses not receive optical signals or with low signals. |
|
Off |
The device has received optical signal. |
|
|
PON |
On |
The device has registered to the PON system. |
|
Blink |
The device is registering the PON system. |
|
|
Off |
The device registration is incorrect. |
|
|
LAN |
On |
Port is connected properly (LINK). |
|
Blink |
Port is sending or/and receiving data (ACT). |
|
|
Off |
Port connection exception or not connected. |
Hot Tags: 1ge wifi xpon onu, China 1ge wifi xpon onu manufacturers, factory, 1Ge Lan Port onu, WIFI GPON, wifi onu, XPON ONU, MINI 1port EPON ONU, 1GE GPON Bridge ONT
You Might Also Like
Send Inquiry